| MAP Installation Kit |
| with Mini Air
Trap - |
|
 |
| with Standard
Air Trap - |
|
|
| with Hi-Flow
Air Trap - |
|
|
|
|
 |
All the quality MAP Products you need to complete your radio and fuel system installations!
Save over 10% by buying your accessories as a kit!
Includes...
- MAP Air Trap
- Fuel Stopper Insert Kit
- Wing Tip Skid Kit
- Fuel Pump Mount
- IO Board Mount
- Ball Valve Mount
- Tidy Clips 6mm
- Tidy Clips 4mm
- Fuel Filter Clips
- Tidy Strips Air Line (3 pkgs)
- Tidy Strips Servo Wire (3 pkgs)
|
|
| Tygon Fuel Tubing |
| 3/32" x 3/16" - |
|
| 1/8" x 1/4" - |
|
| 3/16" x 5/16" - |
|
|
|
|
 |
|
|
|
|
|
 |
Molded from glass filled nylon, package of 8.
|
|
| Tams Servo Mount |
| Mini Size - |
|
| Standard w/ #2 - |
|
| Standard w/ 4-40 - |
|
|
|
|
 |
Mini size servo mount come with #2 screw hardware package. Best fit JR 3421 and Hitec 5245. Some other mini servo also can be fit to this mount if there are the same size.
Standard size servo mount with #2 screw hardware package
will fit most of the standard size servo on the market. JR 537, 2721, 8411. Hitec 635, 5645, 5945, 5975 and standard Futaba servo.
Standard size servo mount with 4-40 hardware
package. Best fit JR 8611.
|
|
|
|
|
 |
Tired of wing tip strikes? With our new skid kit you can easily replace worn out skids in seconds with no tools. It is easy to install, instead of gluing on a skid, our system uses a receptacle that is glued in place and the skid simply plugs in. Replacement skids available.
|
|
|
|
|
 |
Package of four.
|
|
|
|
|
|
|
|
|
|
|
 |
- This air trap can be installed in any position, providing you get the air out when filling.
- It can also be easily drained if you want to transport the airplane via Commercial Airlines.
|
|
|
|
|
 |
- Fuel line feeding the air trap must be at least 3/16" ID for optimum performance
- Keep lines as short as possible when plumbing your model airplane
|
|
| MAP Mini Air Trap - 2 oz. |
|
|
|
 |
- Just fill and fly, like our standard and Hi-Flow Air Traps
- Small bottle for tight installations
- Standard fittings (1/8" ID)
- Will work well on turbines up to 20 lbs of thrust
|
|
4mm and 6mm FestoŽ Ball
Valve Mount |
|
|
|
 |
|
|
|
|
|
 |
- Fits any 1/8" ID fuel line
- Large head for easy removal
|
|
|
|
|
 |
- Reduce the fuel pump line from 3/16" to the 1/8" standard fuel pump fitting (used on most fuel pumps)
|
|
|
|
|
 |
- Designed to prevent fuel stoppers from being cut on thin walled fibreglass fuel tanks
- Simple, Easy installation. Glue in with Hysol.
|
|
|
|
|
 |
|
|
| Wheel Axle - 3/16" |
| Price each - |
|
|
| Set of 3 - |
|
|
|
|
 |
- case hardened
- precision ground
|
|
|
|
|
 |
- clean up those servo wire installations
- can be cut to length required
|
|
|
|
|
 |
- clean up your air lines
- can be cut to length required
|
|
|
|
|
 |
- molded in one piece
- large base for superior glue joint
|
|
| Tidy Clips - 6mm or 1/4" Tygon |
|
|
|
 |
- molded in one piece
- large base for superior glue joint
|
|
|
|
|
 |
- easy removal of fuel filter
- no tools required
|
|
|
|
|
 |
- used to adapt wire strut to fit 1/2" retract socket
|
|
|
|
|
 |
|
|
|
|
|
 |
|
|
|
|
|
 |
- One Way Valve
- Air Up, Spring Down
|
|
|
|
|
 |
|
|
|
|
|
 |
|
Ultra Precision Products... |
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
 |
|
|
|
|
|
 |
|
|
|
|
|
 |
|
|
|
|
|
 |
|
|
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}